About This Product

The SolarEdge S1000 Power Optimiser with 2 x 0.1 Metre Input is a commercial SolarEdge S-Series DC optimiser designed to connect two PV modules in series to one optimiser. It provides panel-level MPPT within a SolarEdge system, helping reduce losses caused by module mismatch, soiling, shading or ageing across larger commercial arrays.

This short-input version uses 2 x 0.1 metre input leads, making it suited to panels with standard junction box cable lengths where the optimiser is mounted close to the modules. It is intended for use with compatible SolarEdge commercial three phase inverters.

Who This Product Suits

The SolarEdge S1000 Power Optimiser with 2 x 0.1 Metre Input suits commercial rooftop, carport and larger field PV systems using SolarEdge commercial three phase inverter architecture.

It is a good fit where installers want two modules per optimiser, panel-level monitoring, flexible string design and built-in SolarEdge safety functions. It is also suitable for systems using high-power or bifacial PV modules, provided the module and inverter design remains within SolarEdge compatibility rules.

Specifications Explained

The SolarEdge S1000 Power Optimiser with 2 x 0.1 Metre Input supports up to two high-power or bifacial PV modules in series, with a rated input DC power of 1100 W and a maximum continuous input current of 15 A. It has a maximum efficiency of 99.5% and weighted efficiency of 98.8%.

The optimiser operates over a 12.5-105 Vdc MPPT range, with a 125 Vdc absolute maximum input voltage. Output is up to 80 Vdc and 18 A during operation. When the inverter or grid is shut down, SolarEdge SafeDC reduces the optimiser output to a low safety voltage.

It includes MC4 connectors, 2 x 0.1 metre input leads, and output leads arranged for SolarEdge commercial string layouts. The unit is IP68 rated and designed for outdoor PV installation conditions.

Summary

The SolarEdge S1000 Power Optimiser with 2 x 0.1 Metre Input is a practical optimiser for commercial SolarEdge PV systems where two modules are connected to each optimiser. It gives installers panel-level MPPT, monitoring visibility and SolarEdge safety functions while helping simplify commercial string design.

Use this model where the short 0.1 metre input configuration suits the module layout and the system is being designed around compatible SolarEdge commercial three phase inverters.

Further Information From The Manufacturer

SolarEdge’s most advanced, cost-effective Power Optimizer for commercial and large field installations

Greater Energy Yields

• High efficiency (99.5%) with module-level MPPT, for maximized system energy production and revenue, and fast project ROI
• Supports high power and bifacial PV modules, and high string current for more power per string

Maximum Protection with Built-In Safety

• Designed to automatically reduce high DC voltage to touch-safe levels, upon grid/inverter shutdown, with SafeDC™
• Includes SolarEdge Sense Connect, allowing continuous monitoring to detect overheating due to installation issues or connector-level wear and tear

Lower BoS Costs

• Flexible system design enables maximum space utilization and up to 2x longer string lengths, 50% less cables, fuses and combiner boxes
• Supports connection of two PV modules in series with easy cable management and fast installation times

Simpler O&M

• Module-level system monitoring enabling pinpointed fault detection and remote, timesaving troubleshooting

Weights & Measurements Information

About Solar Edge

SolarEdge is an inverter and optimiser manufacturer known for module-level power electronics (MLPE). Their system architecture increases design flexibility, provides detailed monitoring, and assists with shade-affected installations. SolarEdge solutions are widely adopted in commercial and residential systems where safety shutdown, string optimisation, or rooftop design constraints are priorities.