Description
About This Product
ZYC SIMPO HV 19.2 + GW8000-ET-20 is a three-phase hybrid solar and battery package combining a 19.2 kWh ZYC Energy SIMPO HV high-voltage LFP battery system with a GoodWe GW8000-ET-20 8 kW ET G2 Series hybrid inverter. The battery configuration uses six 3.2 kWh SIMPO HV modules for 19.2 kWh of usable storage and a nominal battery voltage of 384 V. The GoodWe ET G2 inverter provides 8 kW nominal three-phase AC output and is designed for solar generation, high-voltage battery storage and backup operation. ZYC Energy + GoodWe makes this combination suitable for installations where a substantial battery capacity is required alongside an 8 kW three-phase hybrid inverter.
Product Explainer Video
Soluția completă pentru independență energetică | GoodWe ET G2 + Lynx D
Who This Product Suits
This ZYC Energy + GoodWe package suits three-phase homes and smaller commercial sites wanting to combine rooftop solar, battery storage and backup capability through one hybrid inverter. The 19.2 kWh usable battery capacity is appropriate where overnight consumption is relatively high, where more daytime solar needs to be shifted into the evening, or where a smaller battery would provide insufficient storage. It is also a practical option for installations needing an 8 kW three-phase inverter rather than a larger 10-15 kW unit. Final battery, PV and backup sizing should be checked against the site’s loads, available solar generation and distributor requirements.
Specifications Explained
The ZYC SIMPO HV battery provides 19.2 kWh of usable LFP storage from six 3.2 kWh modules, with a nominal voltage of 384 V, 30 A maximum continuous current and 45 A peak current for 5 seconds. The SIMPO HV platform is IP65 rated, communicates via CAN or Modbus RS485 and has a stated round-trip efficiency of 96%. The GW8000-ET-20 is an 8 kW three-phase ET G2 hybrid inverter with a 150-720 V battery operating range, maximum continuous battery charge and discharge current of 30 A, up to 12 kW battery charging power and 8.8 kW battery discharging power. On the solar side it supports up to 12.8 kW of PV input, uses two MPPT trackers and allows up to 16 A input current per MPPT. The inverter also provides an 8 kVA nominal backup output with UPS-level transfer for appropriately configured backed-up circuits.
Summary
ZYC SIMPO HV 19.2 + GW8000-ET-20 combines 19.2 kWh of high-voltage LFP battery storage with an 8 kW three-phase GoodWe ET G2 hybrid inverter. It gives installers a straightforward ZYC Energy + GoodWe solution for three-phase solar, energy storage and backup applications without moving to a larger inverter than the site requires. The combination offers a useful balance of storage capacity, 8 kW grid-connected output and high-voltage battery operation for residential and smaller commercial systems.
Weights & Measurements
| Weight (kg) | 254.38 kg |
|---|
Downloads
- Datasheet (SIMPO HV-Block 3.2_SIMPO HV-BMS_GW8000-ET-20 – ZYC Energy _ GoodWe ZYC SIMPO HV 19.2 _ GW8000-ET-20 – Datasheet_2.pdf)
- Installation Manual (SIMPO HV-Block 3.2_SIMPO HV-BMS_GW8000-ET-20 – ZYC Energy _ GoodWe ZYC SIMPO HV 19.2 _ GW8000-ET-20 – Installation Manual_2.pdf)
- Warranty Info (SIMPO HV-Block 3.2_SIMPO HV-BMS_GW8000-ET-20 – ZYC Energy _ GoodWe – Warranty_3.pdf)
About ZYC Energy + GoodWe
ZYC Energy + GoodWe brings together two manufacturers specialising in energy storage and solar power electronics. ZYC Energy is headquartered in Shenzhen, China, and its team reports more than 10 years of energy-storage industry experience, with a focus on lithium battery and energy storage systems; it also operates an Australian entity and support presence in North Sydney. GoodWe was founded in 2010, is headquartered in Suzhou, China, and is an established manufacturer of solar inverters and smart energy equipment used internationally. Both brands have an established Australian market presence, with local Australian operations and products developed or approved for Australian solar and energy-storage applications.
