About This Product

The Schneider 22kW Three Phase Smart EV Charging Station with 7 Metre Type 2 Cable is a Schneider Charge Pro wall-mounted AC EV charger for three phase installations. It is designed for charging electric vehicles that use a Type 2 AC connection and includes a tethered Type 2 cable for straightforward daily use.

This model supports up to 22kW charging on a suitable three phase supply, with charging output dependent on the vehicle onboard charger, site supply and installation settings. It includes built-in smart charging communication features, including Wi-Fi, Ethernet and OCPP 1.6 support for connection to compatible monitoring or management systems.

Who This Product Suits

The Schneider 22kW Three Phase Smart EV Charging Station with 7 Metre Type 2 Cable suits homes, workshops, small commercial sites, fleet parking areas and strata-style installations where three phase power is available and faster AC charging is required.

It is a good fit for users who want a fixed, tethered charger rather than carrying a separate charging lead. It also suits installations where network connection, RFID access control or third-party charge management may be required.

Specifications Explained

The Schneider 22kW Three Phase Smart EV Charging Station with 7 Metre Type 2 Cable is rated for 22kW operation on three phase power at 32A. It can also operate at lower outputs depending on how it is supplied and configured by the installer.

The charger uses Mode 3 AC charging and is compliant with IEC 61851-1. It has a single Type 2 charging outlet via the attached cable, built-in RDC-DD protection for residual DC current detection, and can be configured using Schneider’s eSetup app.

Communication options include Wi-Fi and Ethernet, with OCPP 1.6 support for compatible supervision platforms. Access can be configured for open use or controlled use with badge or RFID authentication where required.

Summary

The Schneider 22kW Three Phase Smart EV Charging Station with 7 Metre Type 2 Cable is a practical three phase AC charging station for sites that need higher charging capacity and smart control options. It combines a tethered Type 2 connection, 22kW three phase capability, built-in DC leakage detection and network-ready communication in one fixed charger.

For best results, it should be installed and commissioned by a licensed electrician who can confirm the available supply, protection requirements and charging configuration for the site.

Further Information From The Manufacturer

This Schneider Charge Pro product is a wall-mounted charging station for all electrical vehicles compliant with IEC61851-1 standard.

It can also be floor-standing fixed on a pedestal and can be installed indoor as well as outdoor.

The output type is a 7m attached cable with a T2 socket-outlet at the end, installed at the bottom of the station. The nominal output power is depending on how the product is supplied. It is 7.4kW when fed in single-phase with a rated charging current of 32A under 230V with a 50Hz frequency . It is also 11kW or 22kW when fed in three-phase with a rated charging current of respectively 16A or 32A under 380V with a 50Hz frequency .

It can be used with a TN-S, TN-C, TT or IT 230 earthing system.

The charging station is easy to install and to commission. It is recommended at home as well as at fleets.

It is fitted with a built-in protection against residual direct current (RDC-DD as Residual Direct Current Detecting Device). A Wi-Fi module and 2 Ethernet interface modules are also onboard. It is possible to configure with eSetup to either no access control or a control by badge or RFID authentification card to use the charging station for loading an electrical vehicle.

A white push-button allows to activate a Wi-Fi direct connection, which is then use to connect to eSetup mobile App for the configuration.

One LED is changing color between red, green, blue, white and orange in order to indicate the loading status directly on the charging station. The OCPP 1.6 communication protocol can be used to connect to the supervision device/third party cloud. It can also be connected to Internet home router, either through Wi-Fi or RJ45 Ethernet cable.

Weights & Measurements Information

About Schneider

Schneider Electric is a global electrical and energy management manufacturer with a long history in switchgear, circuit protection, automation, power distribution and connected energy products. In Australia, Schneider and Clipsal products are widely used by electricians across residential, commercial and industrial installations.

Schneider EV charging products sit within the company’s broader electrical infrastructure range, which means they are designed with installer support, standards compliance and integration with modern energy systems in mind.