Solar Heroes Logo

Call Solar Heroes
🛒 0 items – $0.00

Selectronic SP PRO 20kW 120V SPLC 1202

$23,125.00

In Stock

Selectronic SP PRO Series bi-directional sine wave inverter, single-phase.
100% Australian designed and manufactured.
Low distortion interactive inverter charger with grid feed and grid support ability all in one unit.
Five stage battery charging with a dual float stage and adjustable temperature compensation.
Automatic changeover when grid fails without second inverter

In Stock

Selectronic SP Pro works with batteries, solar AC and DC, Hydro, Wind and even fuel generators. Using Selectronic solutions (with MyGrid Kit) you will benefit from an additional 12 months warranty on the inverter.

Selectronic SP Pro works with batteries, solar AC and DC, Hydro, Wind and even fuel generators. Using Selectronic solutions (with MyGrid Kit) you will benefit from an additional 12 months warranty on the inverter. The battery voltage is between 24V and 120V with the continuous output 3kW- 20kW for Single Phase and 9kW – 60kW for Three phase.

About Selectronic company

Selectronic Australia is one of the largest off grid inverter manufacturers worldwide. Founded in 1964, Selectronic has always been an innovator in the field of power inverters and renewable energies. Selectronic products guarantee a cutting-edge basis for efficient and cost effective solar PV systems.

Why to buy Selectronic SP PRO?

 

.     Energy shifting

.     Charge from grid

.     Fast (<30ms) changeover if grid fails

.     PV continues operating when grid down.

.     PV can charge battery when grid down

.     Highest Grid pass through capacity of any inverter, (15-60kW)

.     Huge peak output capacity.

.     Real Off Grid performance

.     10 year warranty

 

SP PRO Data Sheet

 

Technical Data
AC OUTPUTS SPLC1202
Maximum AC Load Power from batteries:
30 seconds 38.0 kW
1 minute 35.0 kW
30 minutes 30.0 kW
60 minutes 24.0 kW
Continuous 20.0 kW
Nominal voltage Off Grid 240 V AC configurable 210 to 240 V AC
Total harmonic distortion Off Grid <3% @ 0-200% rated load
Frequency Off Grid 50 or 60 Hz +/-0.005% No Grid
AC INPUTS
Nominal voltage 210 +/- 15% to 240 +/- 10% V AC
Nominal input frequency 50/60Hz configurable +/- 1% to 10%
AC transfer current capacity 125 A  / 30 kW
Max AC input source, (Generator or Grid) 30 kW
AC transfer time typical < 1/2 cycle
Max charging from Grid or Generator 20.0 kW / 166 A
DC INPUTS
Rated DC input / DC voltage range (V DC) 120 V / 100 – 170
Battery capacity (range) up to 10, 000 Ah
EFFICIENCY
Peak Efficiency 97.20%
DC consumption: idle 6 W
GENERAL
Disconnect time if Grid (AC source) fails < 30 ms
DC Circuit Breakers internal 2 pole 250A
Operating Temperature Range -10 ˚C to 60 ˚C
Inverter display indicators charger status, charge source, usable battery capacity remaining, alarms, AC status.
Renewable charging source Managed AC coupling with any Selectronic Certified single phase inverter, DC Renewable charge controller or generic AC coupled
Data logging storage Up to 2.5 years
SP LINK configuration and monitoring software Included as standard
Ambient temperature operating range -10˚C to 60˚C
FEATURES
Generator Backup Inbuilt for off-grid systems
Battery temperature / Mid point battery voltage Yes / Yes
Battery Compatibility Highly configurable battery charging set points allow integration with many battery chemistries including lithium.
Control Inputs 4 of, 12V to 60V True, < 3V False
Shunt Inputs Two user definable: Suitable for 25 A – 1000 A current shunts at 25mV – 100mV
Relay Control Outputs Relay: 4 of 60 VDC, 500 mA / Digital: 3 of 60 VDC, 5 mA
Communication Port 1 USB (slave) or RS232 (adjustable baud rate of up to 115200)
Communication Port 2 RS485 or RS232 (adjustable baud rate of up to 115200)
Dual, Split & Three Phase compatible Yes with an SP PRO AU on each phase
Warranty 3 – 10 years (conditions apply see website for details)
STANDARDS
Safety – Uninterruptible Power Supply (UPS) IEC 62040-1-1:2002 / AS 62040-1-1:2003
Safety – Power converters used in PV Systems IEC 62109-1 and IEC 62109-2
EMC (Industrial limits) EN 61000.6.4:2007
Grid Connect AS4777.2:2015
Certification Certificate of Suitability, Ctick
Protection IP43
WEIGHTS & DIMENSIONS
Weight: Packed / Unpacked with wall mount 163 kg / 115 kg
Dimensions: Packed / Unpacked h x w x d (mm) 1080 x 740 x 650 / 870 x 540 x 290

 

In Stock